LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2012 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Electronic Shift Module (ESM) - Electrical Diagnostics - 8HP45 Automatic Transmission) >> DTC Troubleshooting >> P1C87-92-Trigger Switch-Performance Or Incorrect Operation >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different variant/trim than selected.
  1. SHIFT LEVER ASSEMBLY 

    View repair

    Repair 

    • Using the schematics as a guide, check the Shift Lever Assembly (SLA) Electronic Shift Module (ESM) terminals for corrosion, damage or terminal push out. Pay particular attention to all power and ground circuits. If no problems are found, replace the Shift Lever Assembly in accordance to the Service Information. Refer to SHIFTER, TRANSMISSION, REMOVAL .
    • Refer to STANDARD PROCEDURE  and perform the TRANSMISSION VERIFICATION TEST.
scientia non olet · About LEMON Manuals