Jet, Piston Oil Cooler: Removal: Removal

WARNING: This page is about a different variant/trim than selected.

Fig 1: Oil Pan Bolt Removal/Installation Sequence

GC0080322

Courtesy of CHRYSLER GROUP, LLC

Remove the oil pan and oil pump pickup tube. Refer to PAN, OIL, REMOVAL .

Fig 2: Piston Oil Jet & Bolt
Courtesy of CHRYSLER GROUP, LLC

NOTE:
It may be necessary to rotate the engine crankshaft to access the piston oil cooler jet retaining bolts.
Remove the piston oil cooler jet retaining bolt (2).
Remove the piston oil cooler jet (1).