Diagnostic Test
WARNING: This page is about a different variant/trim than selected.
- VERIFY DTC IS ACTIVE NOTE:
For vehicle communication problems, use the scan tool to refer to the Network Review Screen. The screen depicts a high level view of the vehicle network. Fault and problem areas appear in red. Selecting any of the network components allows access to the source of the problem.
- Turn the ignition ON.
- With the scan tool, read active DTCs.
Is this DTC active?
Yes
- Refer to DIAGNOSIS AND TESTING .
No
- Refer to DIAGNOSIS AND TESTING and perform the No Response from the Steering Control Module (SCM) diagnostic procedure.