LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2012 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (Transmission Control Module (TCM) - DTCS P1D94 To U1479 - 8HP45 Automatic Transmission) >> Diagnosis And Testing >> P1DAD-Input Shaft/Output Shaft Direction Correlation >> Set Condition:

Set Condition:

WARNING: This page is about a different variant/trim than selected.

The failure is detected if the measured directions of input speed and output speed signal do not correspond to the calculated driving direction for a calibrated amount of time.

Calculated Driving Direction is Forward 

A failure is detected if input speed and output speed direction are different.

Calculated Driving Direction is Reverse 

A failure is detected if input speed and output speed direction are the same.

scientia non olet · About LEMON Manuals