Rocker Arm, Valve: Removal: Removal

WARNING: This page is about a different variant/trim than selected.

Fig 1: Locating Rocker Arms

Courtesy of CHRYSLER GROUP, LLC

NOTE:

The LH cylinder head rocker arms are shown in illustration, the RH cylinder head rocker arms are similar.

Disconnect and isolate the negative battery cable.
Remove the camshaft(s). Refer to CAMSHAFT, ENGINE, REMOVAL .
NOTE:
If the rocker arms are to be reused, identify their positions so that they can be reassembled into their original locations.
Remove the rocker arm(s) (1).