LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2012 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (6.4L - DTCS P0522 To P1521) >> Diagnosis And Testing >> P0703-Brake Switch 2 Performance >> Set Condition:

Set Condition:

WARNING: This page is about a different variant/trim than selected.

When the Powertrain Control Module (PCM) recognizes Brake Switch voltage is not equal to the applied value at the PCM when Brake Switch is applied. This could be a normal condition. If this condition is seen repeatedly by the PCM the fault is set. Cruise will not work for the rest of the key cycle.

scientia non olet · About LEMON Manuals