LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2012 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (6.4L - DTCS P0202 To P0521) >> Diagnosis And Testing >> P0330-Knock Sensor 2 Circuit >> Set Condition:

Set Condition:

WARNING: This page is about a different variant/trim than selected.

The Powertrain Control Module (PCM) detects that the Knock Sensor input voltage is: Above 4.0 Volts, less than or equal to 1.0 Volt with engine RPM at or above 2200 or equal to 0.0 Volts with engine RPM below 2200. Two Trip Fault. Three good trips to turn off the MIL.