Diagnostic Test
WARNING: This page is about a different variant/trim than selected.
- ACTIVE DTC NOTE:
For vehicle communication problems, use the scan tool to Refer to the Network Review Screen. The screen depicts a high level view of the vehicle network. Fault and problem areas appear in red. Selecting any of the network components allows access to the source of the problem.
- Turn the ignition on.
- With a scan tool, read the active DTCs.
Does the scan tool display U0151-LOST COMMUNICATION WITH OCCUPANT RESTRAINT CONTROLLER (ORC)?
Yes
- Refer to U0151-00-LOST COMMUNICATION WITH OCCUPANT RESTRAINT CONTROLLER and perform the diagnostic procedure.
No
- Refer to DIAGNOSIS AND TESTING and perform the Stored Lost Communication DTC diagnostic procedure.