LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2012 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (8HP45 Automatic Transmission (Service Information)) >> Seal, Output Shaft >> Removal >> All Wheel Drive

All Wheel Drive

WARNING: This page is about a different variant/trim than selected.
Fig 1: Output Shaft Seal
GC0152271Courtesy of CHRYSLER GROUP, LLC
  1. Remove the transfer case. Refer to REMOVAL .
  2. Remove the output shaft seal (1) with suitable screw and slide hammer.
scientia non olet · About LEMON Manuals