LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2012 >> 200 V6-3.6L >> Repair and Diagnosis >> Transmission and Drivetrain >> Transmission Control Systems >> Sensors and Switches - Transmission and Drivetrain >> Sensors and Switches - A/T >> Fluid Pressure Sensor/Switch >> Service and Repair >> Transmission Solenoid And Pressure Switch Assembly - Removal

Transmission Solenoid And Pressure Switch Assembly - Removal






REMOVAL

1. Remove valve body Valve Body - Removal.




2. Remove the clamp plate bolts and clamp plate.





3. Remove the electrical connectors to the pressure control solenoid and line pressure sensors.
4. Remove the solenoid/pressure switch assembly.

scientia non olet · About LEMON Manuals