LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2012 >> 200 S, 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> DECKLID/Hatch/Liftgate/Tailgate >> Prop, Gas, DECKLID >> Removal >> Removal

Prop, Gas, DECKLID: Removal: Removal

Fig 1: Support Cylinder Removal/Installation
GC0103344Courtesy of CHRYSLER GROUP, LLC
  1. Open decklid.
  2. Using a small flat bladed tool or equivalent, release the retaining clips while pulling the ball socket away from the ball stud.
    Fig 2: Support Cylinder Retaining Clip
    GC0103345Courtesy of CHRYSLER GROUP, LLC
  3. Remove the gas prop-rod lock caps.
  4. Remove the support cylinder.
scientia non olet · About LEMON Manuals