LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2012 >> 200 S, 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Convertible Top, CST And RHT Common Components >> Standard Procedure >> Standard Procedure - Water Leak Test >> Water Leak Strategy

Water Leak Strategy

Fig 1: Example Of Convertible Top Taping
GC0122831Courtesy of CHRYSLER GROUP, LLC
CAUTION:

Avoid high-pressure washes, as they can damage the top material. Also, increased water pressure may force water past the weatherstrips.

  1. Identify where the water is entering the vehicle and what environmental conditions/driving conditions they occur at.
  2. Dry off all areas and tape (1) off the vehicle, as shown in illustration, except where the water is entering (2) and retest to confirm entry.
  3. Based on where the water is entering and confirmed, diagnose the problem. Refer to CONVERTIBLE TOP, CST AND RHT COMMON COMPONENTS, DIAGNOSIS AND TESTING .
  4. Retest after adjustment or part replacement. If not dry go to step  2. If dry continue to  5.
  5. Remove all tape from the convertible top and test for leaks. Repeat step  1 if not dry.