LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2012 >> 200 Limited, 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Seats, Rear >> Cover, Seat Cushion >> Removal >> Removal

Cover, Seat Cushion: Removal: Removal

Fig 1: Rear Seat Cushion & Retainers
GC0123056Courtesy of CHRYSLER GROUP, LLC
  1. Pull upward at forward edge of the cushion (3) at each retainer loop of the rear seat cushion to disengage the retainer loops from cups in the floor (2).
  2. Guide the seat belts through the loops.
  3. Remove the rear seat cushion from vehicle.
  4. Disengage the J-hooks securing the seat cover to the cushion foam.
  5. Cut the hog rings and discard.
  6. Remove the cover from the foam.
scientia non olet · About LEMON Manuals