Body - Interior & Exterior: Adjustments: Adjustments: Notes
NOTE:
Verify that the door is properly adjusted to the body prior to adjusting the door glass.
| ADJUSTMENT | PROCEDURE LINK |
|---|---|
| UP/DOWN GLASS ADJUSTMENT | Refer to the adjustment procedure. Refer to UP/DOWN ADJUSTMENT-FRONT DOOR GLASS . |
| FORE/AFT GLASS ADJUSTMENT | Refer to the adjustment procedure. Refer to FORE/AFT ADJUSTMENT-FRONT DOOR . |
| FRONT INBOARD/OUTBOARD GLASS ADJUSTMENT | Refer to the adjustment procedure. Refer to FRONT INBOARD/OUTBOARD GLASS ADJUSTMENT-FRONT DOOR . |
| REAR INBOARD/OUTBOARD GLASS ADJUSTMENT | Refer to the adjustment procedure. Refer to REAR INBOARD/OUTBOARD GLASS ADJUSTMENT-FRONT DOOR . |
| FORE/AFT AND UP/DOWN QUARTER GLASS ADJUSTMENT | Refer to the adjustment procedure. Refer to FORE/AFT AND UP/DOWN ADJUSTMENT-QUARTER GLASS . |
| INBOARD/OUTBOARD QUARTER GLASS ADJUSTMENT | Refer to the adjustment procedure. Refer to INBOARD/OUTBOARD ADJUSTMENT-QUARTER GLASS . |
| Section | Measurement (± 2 mm) |
| Section 1 | 8 mm |
| Section 2 | 9 mm |
| Section 3 | 9 mm |
| Section 4 | 11 mm |
| Section 5 | 10 mm |
NOTE:
For on-vehicle gap location. Refer to Fig 1.