LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2012 >> 200 L4-2.4L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Engine Mount >> Service and Repair >> Engine Mount Insulator - Removal >> Rear

Rear






REMOVAL





1. Raise vehicle.
2. Remove lower silencer (1).





3. Remove rear mount retaining bolts (3).
4. Remove rear mount through bolt (1).





5. Remove oxygen sensor (1).
6. Remove rear mount retaining bolts (2).





7. Remove rear mount (1) towards the rear of the vehicle.