LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 V6-3.6L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Block Assembly >> Engine Block Heater >> Description and Operation

Engine Block Heater: Description and Operation






ENGINE BLOCK HEATER





The 3.6L engine block heater (1) is mounted in the cylinder block (2), near the front drivers side corner. The engine block heater (1) is a dry cylinder type design and is powered by 110 volt AC.





The 5.7L engine block heater (1) is mounted in the cylinder block, near the left rear corner. The engine block heater (1) is a dry cylinder type design and is powered by 110 volt AC.

scientia non olet · About LEMON Manuals