B2232

B2232-00-(PTS) PARKTRONICS INTERNAL

For a complete wiring diagram, refer to the Wiring Information .

Theory of Operation

The Park Assist Sensors are ultrasonic transceivers that are completely controlled by the Park Assist Module. The sensors transmit and receive ultrasonic signals. Each sensor has a voltage, signal, and return circuit to the module. The sensors communicate with the Park Assist Module using a dedicated serial bus communication circuit.

- When Monitored:
With the ignition on.

- Set Condition:
The Park Assist Module detects an internal failure.





REPLACE THE PARK ASSIST MODULE

View Repair

Repair

- Replace the Park Assist Module. Park Assist Module - Removal.
- Perform the BODY VERIFICATION TEST. Body Verification Test.