LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (3.6L - DTCS P0160 To P0480) >> Diagnosis and Testing >> P0302-Cylinder 2 Misfire >> Set Condition:

Set Condition:

WARNING: This page is about a different variant/trim than selected.

The threshold to set the fault is application specific; it is tied to the level of misfire that will cause emissions to increase to 1.5 times the standard or in some cases 1%. It is always a two trip fault above the calibrated RPM. It takes one fail to set a Pending Fault and two trips to set the MIL. Three good trips to turn off the MIL.

scientia non olet · About LEMON Manuals