LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (3.6L Engine (Service Information)) >> Cylinder Head >> VALVES, Intake and Exhaust >> Standard Procedure >> Standard Procedure - Refacing Intake And Exhaust Valves >> Valves

Standard Procedure - Refacing Intake And Exhaust Valves: Valves

WARNING: This page is about a different variant/trim than selected.
Fig 1: Inspecting Valve Margin
GC0144259Courtesy of CHRYSLER LLC

Inspect the remaining margin (5) after the valves are refaced. Refer to SPECIFICATIONS  .