Pinion Depth Variance

Fig 1: Pinion Variance Marking

Courtesy of CHRYSLER LLC

Identifying numbers for the ring gear and pinion are marked on the pinion (1). Refer to Fig 1. A plus (+) number, minus (-) number or zero (0). The pinion depth variance/deviation (1) is the amount the depth varies from the standard depth setting of a pinion marked with a (0). The standard depth provides the best gear tooth contact pattern.

Fig 2: Pinion Depth Shim

Courtesy of CHRYSLER LLC

The pinion depth is set by selecting the shim (1) that fits between the pinion housing and the axle housing. Refer to Fig 2.