LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Front Axle) >> Adjustments >> Pinion Depth >> Pinion Assembly Height Measurement

Pinion Assembly Height Measurement

WARNING: This page is about a different variant/trim than selected.
Fig 1: Measuring Sleeve 9681-1
GC0094992Courtesy of CHRYSLER LLC
  1. Install measuring sleeve (special tool #9681-1, Gauge, Pinion Height) (1) over pinion assembly (2). Refer to Fig 1.
    Fig 2: Checking Pinion Height Using Dial Indicator
    GC0081463Courtesy of CHRYSLER LLC
  2. Install Scooter Block (2) and dial Indicator on (1) measuring sleeve (special tool #9681-1, Gauge, Pinion Height) (3). Refer to Fig 2.
  3. Record reading on the dial indicator. The dial indicator reading represents the amount that this particular assembly deviates from the design height.
scientia non olet · About LEMON Manuals