LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 972 (6.7L Diesel - DTCS P063D To P205D - 2500 Hd & 3500 Hd) >> Diagnosis And Testing >> P1123-PTO System Performance >> When Monitored

When Monitored

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

With the Engine running, system voltage between 10.0-16.0 volts, Engine speed greater than 550 RPM, No CAN BUS or PCM communication failures, the PTO enable request from the Upper Switch Bank was ON at some point during the current trip, and the PCM is commanding either the TCM (automatic transmissions) or directly to the Auxiliary Power Distribution Center (PDC) (manual transmissions) to enable PTO operation.