LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 965 (6.4L - DTCS P1593 To P2308 - 2500 Hd & 3500 Hd) >> Diagnosis And Testing >> P1E0A-Closed Loop Fueling Not Achieved - Bank 2 Downstream >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module (PCM) detects a condition where the downstream O2 Sensor has remained in open loop fuel control, from a start-up condition, longer than a calibrated amount of time, when conditions would have otherwise expected closed loop operation. Two trip fault. Three good trips to turn off the MIL.