LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 963 (6.4L - DTCS P0206 To P0524 - 2500 Hd & 3500 Hd) >> Diagnosis And Testing >> P0521-Engine Oil Pressure Sensor Performance >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module (PCM) looks for a delta change in engine oil pressure of 206 kPa (29.88 psi) between key on (zero psi) and above 1150 RPM. If the PCM does not see a change of more than 206 kPa (29.88 psi), the sensor is determined to be inactive. One trip fault.

scientia non olet · About LEMON Manuals