Theory of Operation
WARNING: This page is about a different car, the 2011 RAM Pickup. However, it is still accessible from the selected car via links, so may be relevant.
The engine aftertreatment system monitors the oxygen content in the exhaust. The Powertrain Control Module (PCM) monitors the exhaust gases for oxygen content and varies the fuel injector on time to control the intake air fuel mixture. This diagnostic checks to make sure that the oxygen content matches the expected oxygen content for the engine operating conditions. The PCM will set the fault if it detects that the actual oxygen level measurement does not match the expected value. The PCM will illuminate the MIL lamp immediately when the diagnostic runs and fails. The PCM will turn off the MIL lamp diagnostic runs and passes in four consecutive drive cycles.