Sensor, Oxygen: Installation: 5.7L
WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Threads of new oxygen sensors are factory coated with anti-seize compound to aid in removal.DO NOT add any additional anti-seize compound to threads of a new oxygen sensor.
- Install the O2 sensor. Tighten to 50 N.m (37 ft. lbs.).
- Connect the O2 sensor electrical connector.
- Lower vehicle.