Actuator, Fuel Control: Removal: Removal

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Cover, Bolts & Oil Dipstick

Courtesy of CHRYSLER GROUP, LLC

Disconnect and isolate both of the negative battery cables.
Remove the engine oil dipstick (2).
Remove bolts (1 and the engine cover (3).

Fig 2: Fuel Injection Pump Components - Rear View
Courtesy of CHRYSLER GROUP, LLC
Disconnect the Fuel Control Actuator (FCA) harness connector (6).
Remove screws (1) and the FCA from injection pump.