Rear Cabin Wall
WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative battery cable from the negative terminal on the battery.
- Flip the right rear seat cushion back so that you can adjust the seat back.
- Remove the right rear seat rear inboard bolt with seat belt buckle. Refer to SEAT BELT, REMOVAL .
- Remove the right rear seat assembly. Refer to SEAT, REAR, REMOVAL or SEAT, MEGA CAB REAR, REMOVAL .
- Remove the right rear child seat tether and anchor. Refer to ANCHOR, CHILD SEAT, REMOVAL .
- Loosen or remove the rear cabin wall to gain access to the RF antenna assembly (1). Refer to PANEL, CAB BACK TRIM, REMOVAL .
- Disconnect the connector (2) from the LF antenna.
- Remove both fasteners (3) to remove the LF antenna assembly.