Set Condition
WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
When the localization sequence is not completed successfully. Must fail multiple vehicle TPM Sensor locate processes if localization fails due to a TPM sensor, or if the Radio Frequency Hub (RF-Hub) Module is new and has never attempted localization. If missing TPM Sensors are present on first drive, this DTC will set to show that the TPM Sensor location cannot be determined/guaranteed (cannot revert to last known good locations).