Stand Alone Switch Bracket
WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Position the stand alone hood ajar switch mounting bracket (3) onto the upper radiator cross member (1).
- Install and tighten the screw (2) that secures the mounting bracket to the upper radiator cross member. Tighten the screw to 5.5 N.m (4 ft. lbs.).
- Reinstall the stand alone hood ajar switch (2) into the mounting bracket. Refer to SWITCH, HOOD AJAR, INSTALLATION .