Diagnostic Test
WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
STEERING WHEEL POSITION SENSOR-INTERNAL ELECTRONIC FAILURE
- Perform any Technical Service Bulletins (TSBs) that may apply.
- The ABS Module is reporting internal errors from the SAS.
- Verify that the Clockspring (SAS) is properly installed. Refer to CLOCKSPRING, STANDARD PROCEDURE
.
Were there any problems found?
Yes
- Repair as necessary.
- Perform the ABS VERIFICATION TEST. Refer to STANDARD PROCEDURE .
No
- Replace the Steering Column Control Module (SCCM) in accordance with the Service Information. Refer to MODULE, STEERING COLUMN, REMOVAL .
- Perform the ABS VERIFICATION TEST. Refer to STANDARD PROCEDURE .