LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 901 (Electronic Control Modules (Service Information) 2500 Hd & 3500 Hd) >> Module, Transmission Control >> Removal >> AISIN

Module, Transmission Control: Removal: AISIN

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

This procedure is for the AISIN Transmission Control Module (TCM). The TCM is located in the passenger compartment, underneath the left side of the dash panel. No panels need be removed to access and remove the TCM.

  1. Disconnect and isolate the negative battery cable.
    Fig 1: TCM Bracket Bolts & Connectors
    GC0169634Courtesy of CHRYSLER GROUP, LLC
  2. Disconnect the electrical connectors (1) from the Transmission Control Module (TCM).
  3. Remove retaining bolts securing the TCM bracket (2).
  4. Remove the TCM and bracket from the vehicle.
  5. Separate the TCM from the bracket.
scientia non olet · About LEMON Manuals