LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 ((Powertrain Control Module (Pcm) - Electrical Diagnostics - 68RFE Automatic Transmission)) >> Diagnosis and Testing >> P0933-Hydraulic Pressure Sensor Range/Performance >> Set Condition:

Set Condition:

WARNING: This page is about a different car, the 2011 RAM Pickup. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module (PCM) continuously monitors (actual) Line Pressure and compares it to Desired (target) Line Pressure. If the Line Pressure reading is more than 172.4 kPa (25 psi) higher than the Desired Line Pressure, but is less than the highest Line Pressure ever used in the current gear, the DTC sets.

scientia non olet · About LEMON Manuals