LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 ((Powertrain Control Module (Pcm) - Electrical Diagnostics - 68RFE Automatic Transmission)) >> Diagnosis and Testing >> P0869-Line Pressure High >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2011 RAM Pickup. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes 
(F856) 5-VOLT SUPPLY CIRCUIT OPEN
LINE PRESSURE SENSOR CONNECTION
(T118) LP VFS CONTROL CIRCUIT OPEN
(F856) 5-VOLT SUPPLY CIRCUIT SHORTED TO GROUND
(T118) LP VFS CONTROL CIRCUIT SHORTED TO GROUND
(T16) TRANSMISSION CONTROL OUTPUT CIRCUIT
LINE PRESSURE SENSOR
STUCK OR STICKING MAIN REGULATOR VALVE
POWERTRAIN CONTROL MODULE (PCM)

Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. Refer to  68RFE PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE   .