Diagnostic Test
WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
When Monitored:
- Ignition on, engine running.
Set Condition:
- Transmission Control Module (TCM) detects learned values are not currently in memory.
| Possible Causes |
|---|
| TCM REPLACED |
| TRANSMISSION REPLACED |
Always perform the AS68RC Pre-Diagnostic Troubleshooting procedure before proceeding. Refer to Standard Procedure .
- PERFORM TCM Quick Learn
- This DTC will set if the TCM or the Transmission have been replaced.
Repair
- With the scan tool, perform the Quick Learn Procedure.
- Perform AS68RC VERIFICATION TEST. Refer to Standard Procedure .
- This DTC will set if the TCM or the Transmission have been replaced.