6.7L Diesel Engine
WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - IDLER PULLEY |
| 6 - A/C COMPRESSOR PULLEY |
| 2 - ACCESSORY DRIVE BELT |
| 7 - ACCESSORY DRIVE BELT TENSIONER |
| 3 - P/S PULLEY |
| 8 - GENERATOR |
| 4 - RADIATOR FAN PULLEY |
| 9 - WATER PUMP PULLEY |
| 5 - CRANKSHAFT PULLEY |
| 1 - IDLER PULLEY |
| 5 - CRANKSHAFT PULLEY |
| 2 - ACCESSORY DRIVE BELT |
| 6 - ACCESSORY DRIVE BELT TENSIONER |
| 3 - P/S PULLEY |
| 7 - GENERATOR |
| 4 - RADIATOR FAN PULLEY |
| 8 - WATER PUMP |
| 1 - GENERATOR |
| 6 - P/S PULLEY |
| 2 - WATER PUMP |
| 7 - CRANKSHAFT PULLEY |
| 3 - IDLER PULLEY |
| 8 - A/C COMPRESSOR PULLEY |
| 4 - RADIATOR FAN PULLEY |
| 9 - ACCESSORY DRIVE BELT TENSIONER |
| 5 - GENERATOR |
| 10 - ACCESSORY DRIVE BELT |
CAUTION:
When installing the accessory drive belt, the belt must be routed correctly. If not, engine may overheat due to water pump rotating in wrong direction.
- Vehicles equipped with A/C, position drive belt over all pulleys except water pump pulley.
- Vehicles equipped with out A/C, position drive belt over all pulleys except water pump pulley.
- Vehicles equipped with A/C, attach a suitable tool to the accessory drive belt tensioner.
- Vehicles equipped with out A/C, attach a suitable tool to the accessory drive belt tensioner.
- Vehicles equipped with A/C, rotate accessory drive belt tensioner clockwise. Place belt over water pump pulley (9). Let tensioner rotate back into place. Remove tool. Be sure belt is properly seated on all pulleys.
- Vehicles equipped with out A/C, rotate accessory drive belt tensioner clockwise. Place belt over water pump pulley. Let tensioner rotate back into place. Remove tool. Be sure belt is properly seated on all pulleys.
- Install the air cleaner body. Refer to BODY, AIR CLEANER, INSTALLATION, 6.7L .
- Connect both of the negative battery cables.