LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 881 (Rear Suspension - 2500 Hd & 3500 Hd) >> Shock Absorber, Suspension >> Removal >> Shock With Coil Spring

Shock With Coil Spring

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Support the rear axle with a suitable holding fixture.
  3. Remove the rear inner wheel house splash shield.
    Fig 1: Shock Upper Nut, Washer & Bushing
    GC0161514Courtesy of CHRYSLER GROUP, LLC
  4. Remove the shock upper nut (1), washer and bushing (2).
    Fig 2: Shock Lower Bolt & Nut
    GC0161635Courtesy of CHRYSLER GROUP, LLC
  5. Remove the shock lower bolt and nut.
  6. Remove the shock absorber (1) from the vehicle.
scientia non olet · About LEMON Manuals