Diagnostic Test
WARNING: This page is about a different car, the 2011 RAM Pickup. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FOR RELATED DTCS
- With the scan tool, check for Transmission Line Pressure DTCs.NOTE:
In order to erase this DTC you must reset (erase) the VLP Shift Counter and the Output tooth counter. This is a single procedure in the scan tool called "Clear Variable Line Pressure (VLP) counters".
Repair
- Refer to DTC Based Diagnostics and perform the appropriate diagnostic procedure. Refer to .
- With the scan tool, check for Transmission Line Pressure DTCs.