Special Tools
WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
| 1130 - Splitter, Bearing/Gear (Originally Shipped In Kit Number(s) 6745, 6947, 6949, 9202, 9202A-CAN, 9202CC, 9299.) |
|
| 6310 - Remover, Bearing/Seal (Originally Shipped In Kit Number(s) 8207, 8418, XJ594, XJ595.) |
|
| 6310-2 - Disc (Originally Shipped In Kit Number(s) 8207, 8418, XJ594, XJ595.) |
|
| 6310-7 - Nut (Originally Shipped In Kit Number(s) 8207, 8418, XJ594, XJ595.) |
|
| 6310-9 - Head (Originally Shipped In Kit Number(s) 8207, 8418, XJ594, XJ595.) |
|
| 6739 - Block, Height (Originally Shipped In Kit Number(s) 6730, 9516A-CAN, 9540, 9541.) |
|
| 6740 - Cone (Originally Shipped In Kit Number(s) 6730, 6731, 9516A-CAN, 9540, 9541.) |
|
| 6741 - Screw (Originally Shipped In Kit Number(s) 6730, 6731, 9516A-CAN, 9540, 9541.) |
|
| 8289 - Set, Arbor Disc (Originally Shipped In Kit Number(s) 8887, 8887CC.) |
|
| 8411 - Installer, Seal (Originally Shipped In Kit Number(s) 8655.) |
|
| 8476 - Installer, Seal (Originally Shipped In Kit Number(s) 8708.) |
|
| 8498 - Receiver, Axle Shaft Seal (Originally Shipped In Kit Number(s) 8887, 8887CC, 9972.) |
|
| 8878 - Gauge, Pinion Height (Originally Shipped In Kit Number(s) 8887, 8887CC.) |
|
| 8879 - Adapters, Puller (Originally Shipped In Kit Number(s) 8887, 8887CC.) |
|
| 8881 - Installer, Bearing (Originally Shipped In Kit Number(s) 8887, 8887CC.) |
|
| 8882 - Installer, Pinion Seal (Originally Shipped In Kit Number(s) 8887, 8887CC.) |
|
| 8883A - Wrench, Differential Adjusting (Originally Shipped In Kit Number(s) 8887.) |
|
| 8885-1 - Installer Seal Plate (Originally Shipped In Kit Number(s) 8887, 8887CC.) |
|
| 8885-2 - Assembly, Screw (Originally Shipped In Kit Number(s) 8887, 8887CC.) |
|
| 8886 - Installer, Bearing Cup (Originally Shipped In Kit Number(s) 8887, 8887CC.) |
|
| 8888 - Plug, Differential Bearing (Originally Shipped In Kit Number(s) 8887, 8887CC.) |
|
| 8976 - Pinion Driver (Originally Shipped In Kit Number(s) 8887, 8887CC, 9925, 9926.) |
|
| 8979 - Wrench, Pinion Flange (Originally Shipped In Kit Number(s) 8999.) |
|
| 8982 - Installer, Pinion (Originally Shipped In Kit Number(s) 8887, 8887CC.) |
|
| 8992 - Remover, Pinion Flange (Originally Shipped In Kit Number(s) 8999, 8999CC, 9299, 9299CC , 9300A-CAN.) |
|
| 938 - Bridge (Originally Shipped In Kit Number(s) 6745, 6947, 6949, 9202, 9202A-CAN, 9202CC, 9299.) |
|
| 9611 - Plug, Differential End (Originally Shipped In Kit Number(s) 9690.) |
|
| 9612 - Installer, Bearing (Originally Shipped In Kit Number(s) 9690.) |
|
| 9613 - Adapters, Puller (Originally Shipped In Kit Number(s) 9690, 9720-SUP.) |
|
| C-293-PA - Puller, Press (Originally Shipped In Kit Number(s) 8418, 8837, C-293-M.) |
|
| C-3095-A - Installer, Bearing | |
| C-3339A - Set, Dial Indicator (Originally Shipped In Kit Number(s) 9202.) |
|
| C-3894-A - Puller, Tie Rod (Originally Shipped In Kit Number(s) 9202, 9202A-CAN, 9202CC, 9299, 9299CC , 9300A-CAN.) |
|
| C-4171 - Driver Handle, Universal (Originally Shipped In Kit Number(s) 9202, 9202A-CAN, 9202CC, 9299, 9299CC, 9299CC, 9300A-CAN.) |
|
| D-115-2A - Block, Scooter (Originally Shipped In Kit Number(s) 9329-SUP, 9515-SUP, 9516-SUP, 9517-SUP, 9518, 9519, 9540-SUP, 9541-SUP, 9694, 9926.) |
|
| D-115-3 - Arbor (Originally Shipped In Kit Number(s) 8667, 9516A-CAN.) |
|
| D-146 - Installer, Bearing Cup (Originally Shipped In Kit Number(s) 8667.) |
|
| L-4438 - Dial Indicator Post |