68 RFE Automatic

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Transmission Mount & Bolts - 68RFE A/T - 4WD

Courtesy of CHRYSLER GROUP, LLC

NOTE:

4X4 Models.

CAUTION:

If replacing a engine mount/bracket, be certain to inspect all other engine mounts/brackets in the system. Failure to follow this caution may result in damage to the vehicle.

Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
Position the transmission jack in place.
Remove nuts securing the transmission mount to crossmember.
Raise the transmission.
Remove the bolts (1) and the rear transmission mount (2).

Fig 2: Rear Transmission Mount & Bolts - 68RFE A/T - 4X2 Regular Cab Models
Courtesy of CHRYSLER GROUP, LLC

NOTE:
4X2 Regular Cab Models.

CAUTION:
If replacing a engine mount/bracket, be certain to inspect all other engine mounts/brackets in the system. Failure to follow this caution may result in damage to the vehicle.
Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
Position the transmission jack in place.
Remove nuts securing the transmission mount to crossmember.
Raise the transmission.
Remove the bolts (1) and the rear transmission mount (2).

Fig 3: Rear Transmission Mount & Bolts - 68RFE A/T - 4X2 Crew & Mega Cab Models
Courtesy of CHRYSLER GROUP, LLC

NOTE:
4X2 Crew and Mega Cab Models.

CAUTION:
If replacing a engine mount/bracket, be certain to inspect all other engine mounts/brackets in the system. Failure to follow this caution may result in damage to the vehicle.
Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
Position the transmission jack in place.
Remove nuts securing the transmission mount to crossmember.
Raise the transmission.
Remove the bolts (1) and the rear transmission mount (2).