Thrust Plate

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Camshaft And Thrust Bearing

Courtesy of CHRYSLER GROUP, LLC

NOTE:

Camshaft gear and camshaft are serviced as an assembly. For illustration purposes, camshaft gear shown removed.

Inspect the camshaft thrust plate (1) for excessive wear in the camshaft contact area. Measure thrust plate thickness. Replace any thrust plate that falls outside of the allowable limits.

CAMSHAFT THRUST PLATE THICKNESS

THRUST PLATE DIMENSIONS
MIN.	9.34 mm (0.368 in.)
MAX.	9.60 mm (0.378 in.)