LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 876 (6.4L Engine (Service Information) - 2500 Hd & 3500 Hd) >> Engine Block >> Cover, Structural Dust >> Removal >> Removal

Cover, Structural Dust: Removal: Removal

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
    Fig 1: Steering Rack To Frame Mounting Bolts
    GC0088066Courtesy of CHRYSLER GROUP, LLC
  2. Remove the steering rack to frame mounting bolts (1) and lower the steering rack enough to gain clearance for the structural dust cover removal.
    Fig 2: Transmission Mount To Crossmember Retaining Nuts
    GC0088067Courtesy of CHRYSLER GROUP, LLC
  3. Remove the transmission mount to crossmember retaining nuts (1).
  4. Using a suitable jack, lift the transmission enough to gain clearance for the structural dust cover removal.
    Fig 3: Structural Cover
    GC0092017Courtesy of CHRYSLER GROUP, LLC
  5. Remove the structural dust cover retaining bolts (1, 3 & 4).
  6. Remove the structural dust cover (2).
scientia non olet · About LEMON Manuals