Assembly, Variable Valve Timing, 5.7L : Installation: Installation

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Phaser Alignment Slot

Courtesy of CHRYSLER GROUP, LLC

Align the slot (2) in the phaser (1) with the dowel on the camshaft.

Fig 2: Camshaft Phaser & Bolt
Courtesy of CHRYSLER GROUP, LLC

CAUTION:
Never attempt to disassemble the camshaft phaser, severe engine damage could result.
Position the phaser (2) in place and install phaser retaining bolt (1) and tighten to the proper specification. Refer to TORQUE SPECIFICATIONS .
Install the engine timing cover. Refer to COVER(S), ENGINE TIMING, INSTALLATION .