LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 867 (Steering System - 2500 Hd & 3500 Hd) >> Pump >> Reservoir, Power Steering Pump >> Removal >> Removal

Reservoir, Power Steering Pump: Removal: Removal

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain and siphon the power steering fluid from the reservoir.
  2. Remove the splash shield.
  3. Disconnect the return hose.
    Fig 1: Reservoir & Bolt
    GC0161608Courtesy of CHRYSLER GROUP, LLC
  4. Remove the reservoir mounting bolt (1).
  5. Remove the reservoir (2).
scientia non olet · About LEMON Manuals