Pressure Hose

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Return & Pressure Hoses

Courtesy of CHRYSLER GROUP, LLC

1 - RETURN HOSE

2 - PRESSURE HOSE

NOTE:

Be sure to align the pressure hose so it does not contact the fan shroud or the frame rail.

Install the pressure hose to the vehicle.
Reconnect the pressure hose (2) at the gear. Tighten the hose to specifications. Refer to PUMP, SPECIFICATIONS .
Reconnect the pressure hose at the pump. Tighten the hose to specifications. Refer to PUMP, SPECIFICATIONS .
Remove the support and lower the vehicle.
Refill the power steering system. Refer to PUMP, STANDARD PROCEDURE .