LH - All

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Drag Link, Steering, Link And Coil

Courtesy of CHRYSLER GROUP, LLC

Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
Remove the tire and wheel.
Remove tie rod to knuckle nut (1).
Loosen the nut/bolt on the tie rod adjuster sleeve (11) as necessary.

Fig 2: Identifying Tie Rod, Puller And Left Knuckle
Courtesy of CHRYSLER GROUP, LLC
Remove tie rod (3) from the knuckle (2) with (special tool #8677, Remover, Ball Joint) (1).
Remove the tie rod end from the adjuster sleeve.