LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 867 (Steering System - 2500 Hd & 3500 Hd) >> Linkage, Link And Coil >> Damper, Steering, Link And Coil >> Installation >> Bracket - 2500, 3500

Bracket - 2500, 3500

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Damper, Steering, Link And Coil
GC0161542Courtesy of CHRYSLER GROUP, LLC
  1. Position the steering damper brackets and install the retaining bolts (3). Tighten bolts to specifications. Refer to LINKAGE, LINK AND COIL, SPECIFICATIONS .
  2. Position the steering damper (1) onto the brackets.
  3. Install the steering damper retaining bolts (2) and tighten to specifications. Refer to LINKAGE, LINK AND COIL, SPECIFICATIONS .
  4. Remove the support and lower the vehicle.
scientia non olet · About LEMON Manuals