2500, 3500
WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the steering knuckle. Refer to KNUCKLE, STEERING, REMOVAL .
- Remove the axle shaft from the axle, refer to the appropriate Service Information .
- Position Ball Joint Installer (special tool #6761, Installer, Ball Joint) (RECEIVER) (2) and Remover / Installer (special tool #8445-3, Remover, Ball Joint) (DRIVER) (4) with Ball Joint Press (special tool #C-4212F, Press, Ball Joint) (1) as shown in illustration to remove upper ball stud.