LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 861 (DTCS P1D96-00 To U1479-00 - 8HP70 Automatic Transmission - 1500) >> Diagnosis And Testing >> P1DF9-00-Actual Increase Of Engine Torque Low >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2015 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FOR TCM CAN BUS DTCS 
    1. With the scan tool, read TCM DTCs.

      Are any TCM CAN bus DTCs present?

      Yes 

      No 

      • Go To  2
  2. CHECK IF PCM DTCS ARE PRESENT 
    1. With the scan tool, read PCM DTCs.

      Are any PCM DTCs present?

      Yes 

      No 

      • Using the schematics as a guide, check the Transmission Control Module Assembly (TCMA) terminals for corrosion, damage, and pushed out terminals. Pay particular attention to the power and ground circuits. If no problems are found, replace and program the TCMA in accordance with the Service Information. Refer to VALVE BODY, REMOVAL . Refer to 8HP70 TCM PROGRAMMING PROCEDURE .
      • Perform the TRANSMISSION VERIFICATION TEST. Refer to TRANSMISSION VERIFICATION TEST .