LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (5.7L - DTCS P063A To P2127 - NGC - 3500 Cab & Chassis) >> Diagnosis and Testing >> P2123-Accelerator Pedal Position Sensor 1 Circuit High >> Set Condition:

Set Condition:

WARNING: This page is about a different car, the 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

When APP Sensor No. 1 voltage is too high. Engine will additionally idle if the brake pedal is pressed or has failed. Acceleration rate and Engine output are limited. One trip fault and the code will set within 5 seconds. ETC light is flashing.

scientia non olet · About LEMON Manuals